|
Highway Delineators, Channelizers, & Signs
 |
E-Base MTBF *: 40 hits at 45 mph
Height Above Grade: 3 ½ to 4 feet
Anchor: Surface Mount
Weights:
Colors: W, R, O, Y, G, Bu, Br, Gry
Sheeting: Reflective |
*Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location. Suitable for installation in any environment, E-Base is a truly bid-competitive high-impact delineator. Though not as bullet-proof as our duplex post, the E-Base post is still a very high quality product; a unique, UV-stabilized, copolymer extrusion. To reduce mounting costs, the base itself is just one part. It is cast from a modified, high-density, UV stabilized co-polymer, capable of lasting many years. |
Economy EZ Class Series MTBF*: Over 50 hits at 45 mph
Height Above Grade: 3½ ft. to 4 ft.
Anchor: 18½ inches in ground
Weights:
Colors: W, R, O, Y, G, Bu, Br, Gry
Sheeting: Reflective |
 |
*Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location. Ez Drive is the only post on the market that can be tied in a knot and yet is so stiff it can withstand high wind loading. This price competitive, moderate impact marker is also the easiest to install. Ez Drive has been approved for highway use in some states for moderate and low impact locations such as off-ramps, curbing and barriers. The post is able to withstand up to 50 vehicular impacts at 45 mph. Ez Drive is particularly well suited for marking parks and recreation facilities, buried pipelines, conduits and cables. Installed to the proper depth, it is virtually impossible to pull out of the ground |
 |
Highway Delineator HD 600 Series MTBF*: Over 75 hits at 55 mph
Height Above Grade: 1½ ft. to 4 ft.
Anchor: Copolymer, 1.5 ft in ground
Weights: 1.25-2 lbs.
Colors: W, R, O, Y, G, Bu, Br, Gry
Sheeting: Reflective |
*Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location. HD is a ground-mounted highway delineator designed for areas where posts are subjected to numerous high speed vehicular impacts. The patented duplex post and hinge are UV stabilized and all weather. In certified tests, the post has taken 341 hits at 35mph from both directions and the MTBF (of over 75 hits at 55mph) is unequaled in the industry. Some HDs are still in service after ten years of hard use. HD is presently state-of-the-art in high impact, ground-mounted highway delineation, arguably the best in the industry. |
Surface Mount SM 700 Series MTBF*: Over 75 hits at 55 mph
Height Above Grade: 1½ ft. to 4 ft.
Anchor: Surface Mount
Weights: From 2.25 to 2.75 lbs.
Colors: W, R, O, Y, G, Bu, Br, Gry
Sheeting: Reflective |
 |
*Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location. This is the post by which every other surface mounted highway delineator is judged: the incomparable hi-impact FlexStake SM. The SM will remain serviceable after an incredible number of vehicular impacts at 35mph, 55mph, and even 80mph. In rigorous A-B comparison tests, in all kinds of weather, FlexStake posts have outlasted every other highway delineator on the market by factors of up to 10 to one. SM routinely withstands over seventy-five vehicular impacts at 55mph before failure. |
 |
Tubular Marker TM 750 Series MTBF*: Over 75 hits at 55 mph
Height Above Grade: 1½ ft. to 4 ft.
Anchor: Surface or Ground Mount
Weights: From 2.25 to 2.5 lbs.
Colors: W, O, Y
Sheeting: Reflective |
*Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location. Available in surface or ground mount (not pictured), The Tubular Marker (TM) is an ultra hi-impact channelizer for sites where traffic from side streets merges with traffic in the construction site. Less than 5% breakage after nine months exposure on a heavily traveled thoroughfare is the norm. Also used as a high-impact traffic delineator for locations where 360 degree visibility is required. In case of breakage, post section is easily replaced without demounting anchor. Though similar to the duplex SM, the tubular post hinge and inner core have been strengthened to carry the additional weight and stress of the heavier post. The tubular post itself is a long-life, color-impregnated, UV stabilized, special polymer extrusion. |
SlimLine Reflective GLTMTBF*: 100 hits at 35 mph
Above Grade: 3 to 4 ft.
Anchor: 8" in. in ground
Weights: 4.5 to 6.5oz
Colors: W, R, Y, G, Bu
Sheeting: Reflective |
 |
*Mean time before failure. Results may vary depending upon type of installation and geographic location. SlimLine Reflective GLT is a highly visible, cost effective marking post or traffic control device. Closely spaced, it appears to make a fixed barrier, but it can be run over by vehicles without damage to post or car - used as a traffic barricade for the general public while allowing passage for official vehicles. Used in off-road sports events, the stake flexes away from contestants reducing the chance of personal injury. Slimline is simple to install and remove. It may be set in the AN500 anchor or be driven directly into a pre-drilled hole in dirt. To see optional AN500 click here. Like all of our small hinged posts, SlimLine can be mowed over by any standard reel mower. |
 |
Utility Marker UM 300 Series MTBF*: Over 75 hits at 55 mph
Height Above Grade: 1½ ft. to 4 ft.
Anchor: 1½ ft. in ground
Weights: From 1.1 to 1.75 lbs.
Colors: W, R, O, Y, G, Bu, Br, Gry
Sheeting: Reflective |
*Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location. The Utility Marker (UM) is an economically priced, moderate impact, off-road sign post or marker that was developed to mark underground pipelines, cables, or other buried devices. Depending on customer label design, the patented convex faces are wide enough (three inches) to carry identifying signs readable at up to 100 feet. Though not as impact-proof as our hinged, ultra-high-impact HD delineator, the Utility Marker can still take an unbelievable amount of abuse. In several certified tests, this unhinged marker withstood over 75 automotive hits at 35mph. And due to its patented barbed anchor, cattle and deer can rub against it without pulling it out of the ground. |
High-Impact Utility Signs *Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location. All standard signs are available that do not exceed the load carrying capacity of the post. We also carry in stock: K Marker, Chevron Marker and other small signs that are not pictured. Sign faces are cut from UV resistant, hi-impact, post-consumer recycled copolymer. Faces are silk-screened with hi-density, UV stabilized, copolymer inks. Faces are mechanically fastened to one of two posts: hi-impact duplex posts (as shown) and the hi-impact tubular post used in our highway channelizer. Copolymer faces available in all standard colors. Specialized sign shapes and silk screening are available on special order MTBF*: 45 to 75 hits at 35 mph
Above Grade: 3 to 4 ft.
Anchor: Various - depending on application
Weights: From 3.5 to 5 lbs.
Post Colors: W, R, O, Y, G, Bu, Br, Gry
Sign Faces: Reflective & Nonreflective |
 |
 |
|
