|
Fall Protection and
Rescue Systems for Confined Space
 |
Tripod
System |
|
Model#
2005 |
|
MSE Tripod
Fall Protection and Rescue System for Confined Space provides safe
access to any confined space, protection against falls and rapid
retrieval in the event of an emergency.
The Tripod System includes:
Anchor point:
Tripod Model# T100-7 or T100-9
Fall Protection and rescue device:
3 Way Rescue/Recovery Winch Model# 2005 *
Optional (job related):
Personnel Winch Model# 142
Material/Work Winch Model# 140
All components meet OSHA, ANSI and EN standards
* Patented
|
|
|
 |
Tripod |
|
|
|
MSE Tripod is a portable, lightweight, high-strength anchor that
features:
-adjustable telescoping legs
-cast aluminum head w/ two forged steel eyebolts
-locking mechanism to secure legs in working position
-anti-skid rubber feet
-leg chains for secondary backup
-supports 5,000 lbs. (OSHA compliant)
Available: Model# T100-7 (7 ft. Tripod)
Model# T100-9 (9 ft. Tripod)
Model#T100-7
Hight: 4’-7”
Weight: 40 lbs.
Leg Span: 60”
Working Load: 310 lbs.
Model# T100-9
Hight: 57 ½”-9”
Weight: 46 lbs.
Leg Span: 73”
Working Load: 310 lbs
Recommended devices /accessories:
3 Way Rescue & Recovery Winch Model# 2005,
Work Winch Model # 140, Personnel Winch Model# 142,
Retractable Lifeline, Pulley, Carabiner, Tripod Carry Bag.
|
|
|
 |
3 Way Rescue
& Recovery Winch |
|
(SKU #XXXXXX) |
|
The Three Way Rescue and Recovery Winch Model# 2005 is designed for
use in manholes, tanks and other confined spaces where fall-arrest
and retrieval rescue are essential. The winch attaches to any MSE
Tripod, Quadpod, or Davit with quick-insert locking pins. Operated
with one hand, the 3 Way Rescue and Recovery Winch performs 3
important functions:
1. Fall Arrest – braking system arrests a fall within 24”
2. Retrieval – elevates a worker from a confined space
3. Reverse – if a worker becomes wedged in, he can be lowered and
repositioned.
Working Load: 310 lbs.
Cable Diameter: 3/16"
Cable Length: 50' to 100' Galvanized, Stainless Steel, Technora |
|
|
 |
Personnel
Winch Model# 142 |
|
Model#
142 |
|
Personnel Winch Model# 142 is designed for lowering, raising and
supporting a worker in a confined space or for use in rescue
operations.
Features:
Primary Brake System holds loads in place when raising/lowering is
stopped or when handle is released.
Secondary Break system automatically activates in case of
“freewheel”.
CableTensioner keeps the cable even thus reducing stress and
wear.
Working Load: 310 lbs.
Cable Diameter: 3/16"
Cable Length: 50' to 100' Galvanized, Stainless Steel, Technora |
|
|
 |
Material/Work
Winch Model# 140 |
|
Model# 140 |
|
Material/Work Winch Model# 140 is designed for lowering and raising
materials and parts. The winch can be easily attached to any MSE
Tripod, Quadpod, or Davit.
Working Load: 350 lbs.
Cable Diameter: 3/16"
Cable Length: 50' to 300' Galvanized, Stainless Steel, Technora |
|
|
 |
PRODUCT NAME |
|
Model#
Q-200LB |
|
MSE Quapod
Fall Protection and Rescue System for Confined Space provides safe
access to any confined space, protection against falls and rapid
retrieval in the event of an emergency.
MSE Quadpod System is used in situations where the use of the
Tripod System is impractical or impossible.
The Quadpod System includes:
Anchor point:
Quadpod * (Q-200LB)
Fall Protection and rescue device:
3 Way Rescue & Recovery Winch Model# 2005 *
Optional (job related):
Personnel Winch Model# 142
Material/Work Winch Model# 140
All components meet OSHA, ANSI and EN standards
* Patented |
|
|
Retrieval Systems | | Gemtor complete non-entry confined space
retrieval systems come complete with everything you need to enter a
vertical confined space with an acceptable means of access, except
a full-body harness which should be selected
based on application needs and user preferences. If there is no
acceptable means of access, then a Man-Rated winch such as the
Model # MRW-50 will also need to be added to the
system. |
| 
| The Complete System
Includes:
Model # TP-7 Aluminum Tripod
Model # RS3 Arresting/Retrieval/Lowering
Device
Model # 51C Split
Pulley
Use these numbers when
ordering:
Model # CSRS3-50 with 50' of
galvanized steel cable Model # CSRS3-50S with 50' of stainless
steel cable |
| 
| Tripods
The durable, lightweight, aluminum tripod features
auto-locking, telescoping legs. Cast aluminum tripod head comes
complete with two integrated locking snaphooks for attachment of
pulleys or auxiliary equipment. Each of the tripod’s legs may be
independently adjusted to compensate for uneven terrain using quick
insert locking pins. Anti-skid rubber feet and leg chains help make
Gemtor tripods OSHA compliant anchorages capable of supporting
5,000 lbs. (310 lbs. working load)
Available Models:
Model # TP-7 - weight 40 lbs., Height 4' - 7', Leg span
60" Model # TP-9 - weight
46 lbs., Height 57 1/2" - 9', Leg span 73" |
| 
| Quadpods
Model # QP-4 Portable Quadpod
Ideal for situations where the use of a tripod is either
impractical or impossible. The Quadpod is easy to set-up and
collapse and each leg is independently adjustable to compensate for
uneven terrain. The removable boom rotates 360º and locks in any
position. Height 90", Reach 26", Tested static load 5400 lbs.,
Working load 310 lbs., Distance between legs
54".
|
| 
| Davits
Model # QP-1 Permanent Davit
The davit’s permanent base can be mounted to steel flooring or
concrete, or on the back of a truck and is especially useful for
tank entry or over edges. A removable boom that rotates 360º easily
attaches to the base and can be locked in any position to offer
flexibility for maneuvering equipment or a worker. Additional bases
can be ordered (see below) and one or more booms can be moved among
many permanently installed bases. Height 89", Reach 26", Tested
static load 5400 lbs., Working Load 310 lbs. | |
| 
| Gemtor
Arresting/Retrieval/Lowering device (Three-way) Multi-function fall
arrest/retrieval device helps protect
a worker from falling and has an integral winch mechanism that
allows a worker to be raised to the surface quickly and easily.
Attaches to any Gemtor Tripod, Quadpod, or Davit with quick-insert
locking pins or can be hung from overhead using an optional
carabiner. Features include a large, rubber-coated knob which makes
engaging and disengaging retrieval mode an easy, one-hand
operation. Precision internal components and a strong,
weather-resistant cast aluminum housing ensure reliability and
dependability. The Model # RS3 has two independent braking systems:
an energy absorbing centrifugal brake arrests a fall softly within
24"; a friction brake activates immediately when raising or
lowering is stopped and holds the load in place.
The unit is supplied with 3/16" diameter galvanized or stainless
steel cable lifeline in 50' or 100' lengths and has a permanently
attached locking swivel snaphook for connection to a full-body
harness.
Available
Models:
Model # RS3-50S 50' of stainless steel cable, 45 lbs.
Model # RS3-100 100' of galvanized steel cable, 65
lbs. |
| 
| Gemtor Man Rated Winches
Designed for raising or
lowering an employee into a
work position or for use in rescue operations. Features cable guide
for automatic placement of cable on drum and two independent
braking systems to ensure reliable operation. Housing is made of
sturdy lightweight cast aluminum. Attaches to any Gemtor Tripod,
Quadpod, or Davit. Comes with 3/16" diameter galvanized or
stainless steel cable with locking swivel snaphook permanently
attached. NOT FOR FALL ARREST.
Available
Models:
Model # MRW-50 50' of galvanized steel cable, 35 lbs.
Model # MRW-50S 50' of stainless steel cable, 35 lbs.
Model # MRW-100 100' of galvanized steel cable, 45 lbs.
Model # MRW-100S 100' of stainless steel cable, 45
lbs |
| 
| Gemtor Work Winches Attaches to any
Gemtor Tripod, Quadpod, or Davit and can be used for raising and
lowering materials. Comes with locking swivel snaphook permanently
attached to galvanized or stainless steel 3/16" diameter cable.
Features a cable guide for automatic placement of cable on
drum.
NOT FOR FALL
ARREST or RAISING or LOWERING of PERSONNEL.
Available
Models:
Model # MW-50 50' of galvanized steel cable, 20 lbs.
Model # MW-50S 50' of stainless steel cable, 20 lbs.
Model # MW-100 100' of galvanized steel cable, 30
lbs. | |
| Auxiliary Equipment | | | 
| Pulley Model # 51C Stainless steel cheeks open to
allow placement of cable or rope on 3/4" wide 31/2" diameter
aluminum sheave.
Weighs 1 1/4 lbs. Working load 310 lbs. |
|
 | Wristlets with Yoke
Lanyard Model # 930Y Wristlets are made of durable
3-ply neoprene impregnated nylon and are designed for use in
confined spaces or tanks with narrow openings where the worker may
have to be withdrawn. Wristlets are sold in pairs; each wristlet
has a permanently attached 1" wide x 6' long (3' each leg)
polyester web yoke lanyard with a D-ring in the center.
Wristlets Model # 930 Same as Model # 930Y, except
without yoke lanyard. |
|
 |
Yoke Lanyard with
Spreader Bar
Model #
261SB Two-legged 1" wide polyester web lanyard with a locking
snaphook at each end and a D-ring in the center. Spreader bar
separates lanyard’s legs for attachment to shoulder D-rings of
harness. Standard length: 5' (30" each leg).
Yoke
Lanyard
Model #
261LY Same
as Model # 261SB except without the spreader bar. Standard length:
6' (3' each leg). |
|
 | Sentry Carrying Bags Model # WB1 Carrying bag for Sentry
Self-Retracting Lifelines, retrieval winches or other equipment.
Made of nylon, has solid reinforced bottom with feet. Measures 12"
high x 12" wide x 20" long.
Model # WB2 Same as above except without reinforced bottom
and feet
|
|
 | Tripod Carrying Bags Model # TB7 - Carrying bag for Model # TP-7
tripod, made of polyester reinforced vinyl. Model # TB9 - Carrying bag for Model # TP-9 tripod, made of polyester
reinforced vinyl |
|
| | Gemtor full-body harnesses distribute the
forces generated during a fall over at least the thighs, pelvis,
chest, and shoulders. The standard sliding back D-ring helps
to suspend a fallen worker in an upright position after the
fall. | | All Gemtor harnesses share the following common
features: | | •
Sliding back (dorsal) D-ring for fall arrest or restraint
• Universal sizing
• Two color design for easy donning
• Full shoulder and leg strap adjustment for proper fit
• Accessory ring to store lanyard snap when not in use
• OSHA/ANSI compliance | | All styles are available with the following
options: | | •
Hip D-rings for positioning
• Shoulder D-rings for retrieval
• Integral energy absorbers
• Back and shoulder pads | | Buckle Types |
Quick Connect |
Friction Buckle |
Tongue Buckle &
Grommet |
|
| 
|
Model # 900
- Lightweight, sub-pelvic, polyester full-body harness.
Designed for ease of mobility and all day comfort. Features
include quick connect leg straps and chest strap.
New York State Approval # 9592
Meets OSHA, ANSI standards |
| 
|
Model # 922
- Lightweight, sub-pelvic, polyester full-body harness.
Ideal when a worker is assigned his own harness. Once
adjusted the quick connect buckles on the chest and leg straps make
donning and doffing fast and simple with additional adjustment
necessary only when compensating for seasonal clothing changes.
New York State Approval # 9593
Meets OSHA, ANSI standards
CSA Z259.10 approved model available |
| 
|
Model # 922SPL
- Based
on The 922 series, this harness has quick connect chest and leg
straps. Special features include all black webbing that blends
easily with outer clothing, an integral soft pack energy absorber,
and a pouch for lanyard storage.
New York State Approval # 9593
Meets OSHA, ANSI standards
CSA Z259.10 approved model available
|
| 
|
Model # 932 -
Lightweight, sub-pelvic, polyester full-body
harness. The Infinitely adjustable friction buckles on the
leg straps and quick connect chest strap makes the 932 the perfect
solution when a harness must be shared among workers.
New York State Approval # 9594
Meets OSHA, ANSI
standards
Model # 832
- Same as
above except with tongue buckle leg straps. |
| 
| 
New Front D-ring |
Model # 933
- Lightweight, sub-pelvic, polyester full-body harness.
Features front D-ring for ladder climbing, positioning, suspension,
rescue or restraint. Quick connect buckles on leg straps and at hip
for easy donning and doffing. (pat. pend.)
Meets OSHA, ANSI
standards
Model #
833 - Same as above except with tongue buckle leg straps. |
| 
|
Model # 936
- Traditional style, heavy-duty nylon harness with friction
buckle adjustment of the waist belt, leg straps and shoulder
straps. Shown with optional back and shoulder pads.
New York State Approval # 9206
Model # 836
- Same as above except with tongue buckle waist belt and leg
straps.
Meets OSHA, ANSI standards |
|  |
Construction
Style
Model # 955 -
Sub-pelvic, polyester full-body
harness with foam back pad, and removable, heavy-duty tongue buckle
waist belt. Other features include adjustable shoulder straps and
quick connect chest and leg straps.
Model # 955H
(shown) - Same as #955
except with Positioning D-rings on back pad.
Model # 855 -
Same as #955 except with tongue
buckle leg straps.
Model # 855H
- Same as
#955 except with D-rings on back pad and tongue buckle leg
straps. |
|  |
Model # 859 -
Lightweight, sub-pelvic,
polyester full-body harness with adjustable shoulder straps, tongue
buckles on leg straps and waist belt and quick connect buckle on
chest strap.
Meets OSHA, ANSI
standards
Model # 959
- Same as
above except with quick connect leg straps and waist belt. |
| 
| Fall Protection
Coveralls Model # FPC - Patented design features an OSHA compliant full-body
harness permanently incorporated into a 8.5 oz. Flame retardant Indura®
coverall. The coveralls come in a range of sizes and since
the harnesses is sized to the coverall, no adjustment or adjusting
hardware is needed. Inside the coverall, there are no loose
straps, making donning fast and simple. The Model # SPCL
energy absorber fits in a specially designed pocket at the center
of the wearer's back. A chest pocket holds the lanyard when not in
use. Meets CSA Z259.10 |
| 
|
Nomex® Fall
Protection Overalls
Model # FPO
-Made of 4.5
oz. Nomex® IIIA, this overall is lightweight enough to be worn in
almost any climate, offers the flame
resistance of Nomex®, and features the
fall protection of an OSHA compliant polyester full-body harness.
The overall is available in a range of sizes and requires only
minimal adjustment since the harness is sized to fit the overall.
Quick connect buckles at the shoulder straps makes donning fast and
simple. The Model # SPCL energy absorbing lanyard fits in a
specially designed pocket at the center of the wearer’s back. A
chest pocket holds the snaphook and web lanyard when not in use.
CSA Z259.10 approved model available. |
| 
|
Reflective
Harness
Model # 965 - Lightweight, sub-pelvic, polyester full-body harness.
Bright neon orange webbing with a 3M retro-reflective stripe is
Ideal for utility, bridge and other workers who would benefit from
the highly visible nature of this harness.. Quick connect
buckles on the chest and leg straps make donning and doffing fast
and simple with additional adjustment necessary only when
compensating for seasonal clothing changes. Meets OSHA, ANSI
standards |
|  | 
| Tower Climbers Harness Back (dorsal) D-ring Front positioning/restraint/climbing
D-ring Tongue buckle body belt with hip
positioning D-rings and foam back pad. Seat sling with suspension D-rings. Quick connect chest strap Polyester webbing construction for added
durability Universal Size (XS, XL available) Meets OSHA and ANSI standards Available Models: Model # 2005 - With quick connect leg
straps Model # 2015 - With tongue buckle leg straps |
|
 |
|
