|
Specialty Hand Protection Products
| The high heat Kevlar blend gloves and mittens in
this section demonstrate lengths and styles. All mittens are
reversible, wool lined and single layered unless otherwise noted.
All gloves are pairs, wool lined and single layered unless noted.
All glove fabrics shown are available in any of these styles. |  |  |  |  |  |  | | KV-171 | KV-174 | KV-178 | KV-234 | KV-231 | KV-238 | | 11" | 14" | 18" | 14" | 11" | 18" |
Reinforcement Options |  |  |  | | FB-234 | FA-234 | Q-174 | 184 | | Full reinforcement with Kevlar on palm, fingers and thumb | Full reinforcement with leather on palm, fingers and thumb | Extra layer of wool quilted under fabric on palm, and thumb | Two layers of fabric on palm and thumb with an extra layer of
wool quilted under fabric. Available in four standard lengths. | Fabric Options |  |  | | 234-AKV-ZP | 234-AZ-Z | 234-AKV-KV | | Combo glove. 19 oz. aluminized Kevlar aramid fiber blend on
back for up to 2000ºF radiant protection. 35 oz. Zetex Plus palm
for short duration up to 2000ºF. Moderate abrasion resistance. | Combo glove. 35 oz. Zetex glass on palm for short durations up
to 1000ºF. 25 oz. aluminized Zetex for up to 2000ºF radiant
protection on back side. Moderate to poor abrasion resistance. | Combo glove. 19 oz. aluminized Kevlar aramid blend on back for
near 2000ºF radiant protection. 22 oz. Kevlar aramid blend palm for
working temperature of 400º - 600ºF and good abrasion resistance. | Fabric Options Continued |  |  |  | | 234-Z | 234-ZP | 234-V-SSM | 234-GL | | 35 oz. Zetex fiberglass. Short duration up to 1000ºF. Moderate
to poor abrasion resistance | 35 oz. Zetex Plus treated fiberglass. Short duration up to
2000ºF. Moderate abrasion resistance. Double layer gloves are
recommended when working with higher heats. | 36 oz. Vertex vermiculite coated fiberglass. Short durations up
to 2000ºF. Moderate abrasion resistance. Shown with steel mesh
reinforcement for better abrasion resistance. | 26 oz. white generic glass fabric. Short durations up to
1000ºF. Poor abrasion resistance. |  |  |  |  | | 234-KTW | 234-KT | 234-PBI | 234-MT | | 8 oz. Kevlar twill. Working temperature of 500º - 600ºF.
Superior abrasion resistance. Good dexterity | 22 oz. Kevlar terry. Working temperature of approx. 600ºF.
Superior abrasion resistance. | Polybenzamidazole blend available in 22 oz. or 45 oz. Higher
working temperatures near fiberglass levels with superior abrasion
resistance. 45 oz. PBI offers a thick barrier for longer heat
durations but less dexterity | Terry cotton "mock twist" glove for lower temperatures. Can be
used as a baker's glove. |  |  | | | | 234-THL | 234-AKV | 234-AZ | 234-ARH | | Brown thermal leather withstands premature hardening up to
500ºF. Good abrasion resistance. | 19 oz. aluminized Kevlar aramid fiber blend. Up to 2000º
radiant heat. Some sparks and molten splash. Good abrasion
resistance. | 25 oz. aluminized Zetex. Up to 2000ºF radiant heat. Some spark
and splash. Moderate abrasion resistance | 19 oz. aluminized rayon. Up to 2000ºF radiant heat. Some sparks
and molten splash. Moderate abrasion resistance. | Cover Mitts |  |  | | 105-CTJ | 105-OTJ | WM-105-CTJ-10-V | | 9" closed top jumbo cover mitt. For over mittens. | 8" open top jumbo cover mitt. For over gloves | Wire mesh covered closed top Vertex cover mitt for over
mittens. For high heat and abrasion resistance. | | Economical slip on glove and mitten savers.
Reversible unlined cover mitts. | Fingerless Gloves & Cable Former's
Gloves| No thumb Grain leather half gloves with adjustable wrist strap | 21 |  | | With thumb Grain leather half gloves with adjustable wrist strap | 22 |  | | Split leather patch on palm — no thumb Grain leather half gloves with adjustable wrist strap | 23 |  | | Split leather patch on palm and thumb — with thumb Grain leather half gloves with adjustable wrist strap | 24 |  | Open Back Hand Pads — Thumb Type| Plain Cool protection with the fit of a mitten, split leather
construction. For bare hand or over thin gloves | 715 |  | | Steel stapled patch Cool protection with the fit of a mitten, split leather
construction. For bare hand or over thin gloves | 716 |  | | Plain patch Cool protection with the fit of a mitten, split leather
construction. For bare hand or over thin gloves | 717 |  | | Double leather, steel reinforcement on palm and thumb. Wool
lined. Adjustable strap Cool protection with the fit of a mitten, split leather
construction. For bare hand or over thin gloves | 27 |  | Oval Hand Pads with Slit |  | | 711 | 711-CL | | For handling hot, rough and abrasive materials.
Available in 3 sizes, with or without steel staple reinforcement
and single layer or multilayered. | | Size | Plain 1-ply | Steel Stapled 1-ply | Plain 2-ply | Steel Stapled 2-ply | 7-1/2" X 10-3/4"
(most popular) | 711 | S-711 | 2P-711 | 2P-SS-711 | | 7" X 9" | 707 | S-707 | 2P-707 | 2P-SS-707 | | 6" X 8-1/2" | 700 | S-700 | 2P-700 | 2-SS-700 |
| Miscellaneous Pads |  |  | | 709 Square Hand Pads | 44 Reversible Hand Pad | BP-2 Baker's Pad — Terry | Specify fabric: Kevlar, Zetex Plus, Zetex, Blackflex, Leather
or other
One layer of wool quilted between two layers of fabric; i.e.,
Fabric - Wool - Fabric
Available in 4 sizes:
709-6 6" X 6"
709-8 8" X 8"
709-10 10" X 10"
709-12 12" X 12" | Available in three styles: 44 Plain (shown)
SR44 Steel staple reinforced
P44 Plain patch reinforced | 8" X 12", two-ply 24 oz. terry serged (loop out), sewn around
edges BP-1 With slit
BP-2 With 2 elastic straps (shown) | Anti-Vibration Products |  | 
 | | SX-01 | GX-04 | 25 | | Reversible oval shock pad with elastic; for palm area | Grain leather fingerless glove style anti-vibration glove | Bundler's style anti-vibration hand guard | |
 |
|
