L-853 AIRPORT MARKERS

Anchor:  Ground Mount 
Colors:     W,, O, Y
Height:     19", 24", 30", 36" & 48" Above Ground 

Flexstakes 650 (L-853) series is an all-weather, tubular ground mounted delineator that can take 30 -100 more hits than our competitors posts. Our tubular ground mount delineators are highly visible at 360 degrees. The 650 (L-853) are tested/certified by ETL and meet the FAA’s L-853 standard. 

The post is color impregnated, UV stabilized, copolymer extrusion-impact resistant. Post is extruded from a semi-flexible hi-impact polymer. The hinge is hi-density, all-weather polymer, mechanically fastened to a patented barbed anchor that really stays in the ground. The anchor is hi-density polymer that is unaffected by adverse soil conditions.

Highway Delineator HD 600 Series

MTBF*:     Over 75 hits at 55 mph

Height Above Grade:     1½ ft. to 4 ft.

Anchor:     Copolymer, 1.5 ft in ground

Weights:     1.25-2 lbs.

Colors:     W, R, O, Y, G, Bu, Br, Gry

Sheeting:     Reflective

*Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location.

HD is a ground-mounted highway delineator designed for areas where posts are subjected to numerous high speed vehicular impacts. The patented duplex post and hinge are UV stabilized and all weather.

In certified tests, the post has taken 341 hits at 35mph from both directions and the MTBF (of over 75 hits at 55mph) is unequaled in the industry. Some HDs are still in service after ten years of hard use. HD is presently state-of-the-art in high impact, ground-mounted highway delineation, arguably the best in the industry.

Surface Mount SM 700 Series

MTBF*:     Over 75 hits at 55 mph

Height Above Grade:     1½ ft. to 4 ft.

Anchor:     Surface Mount

Weights:     From 2.25 to 2.75 lbs.

Colors:     W, R, O, Y, G, Bu, Br, Gry

Sheeting:     Reflective

*Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location.

This is the post by which every other surface mounted highway delineator is judged: the incomparable hi-impact FlexStake SM.

The SM will remain serviceable after an incredible number of vehicular impacts at 35mph, 55mph, and even 80mph. In rigorous A-B comparison tests, in all kinds of weather, FlexStake posts have outlasted every other highway delineator on the market by factors of up to 10 to one. SM routinely withstands over seventy-five vehicular impacts at 55mph before failure.

Tubular Marker TM 750 Series

MTBF*:     Over 75 hits at 55 mph

Height Above Grade:     1½ ft. to 4 ft.

Anchor:     Surface or Ground Mount

Weights:     From 2.25 to 2.5 lbs.

Colors:     W, O, Y

Sheeting:     Reflective

*Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location.

Available in surface or ground mount (not pictured), The Tubular Marker (TM) is an ultra hi-impact channelizer for sites where traffic from side streets merges with traffic in the construction site. Less than 5% breakage after nine months exposure on a heavily traveled thoroughfare is the norm. Also used as a high-impact traffic delineator for locations where 360 degree visibility is required. In case of breakage, post section is easily replaced without demounting anchor.

Though similar to the duplex SM, the tubular post hinge and inner core have been strengthened to carry the additional weight and stress of the heavier post. The tubular post itself is a long-life, color-impregnated, UV stabilized, special polymer extrusion.

SlimLine Reflective GLT

MTBF*:     100 hits at 35 mph

Above Grade:     3 to 4 ft.

Anchor:     8" in. in ground

Weights:     4.5 to 6.5oz

Colors:     W, R, Y, G, Bu

Sheeting:     Reflective

*Mean time before failure. Results may vary depending upon type of installation and geographic location.

SlimLine Reflective GLT is a highly visible, cost effective marking post or traffic control device. Closely spaced, it appears to make a fixed barrier, but it can be run over by vehicles without damage to post or car - used as a traffic barricade for the general public while allowing passage for official vehicles. Used in off-road sports events, the stake flexes away from contestants reducing the chance of personal injury.

Slimline is simple to install and remove. It may be set in the AN500 anchor or be driven directly into a pre-drilled hole in dirt. To see optional AN500 click here. Like all of our small hinged posts, SlimLine can be mowed over by any standard reel mower.

Utility Marker UM 300 Series

MTBF*:     Over 75 hits at 55 mph

Height Above Grade:     1½ ft. to 4 ft.

Anchor:     1½ ft. in ground

Weights:     From 1.1 to 1.75 lbs.

Colors:     W, R, O, Y, G, Bu, Br, Gry

Sheeting:     Reflective

*Mean time before failure. Results of certified tests made under controlled conditions. Results may vary depending upon type of installation and geographic location.

The Utility Marker (UM) is an economically priced, moderate impact, off-road sign post or marker that was developed to mark underground pipelines, cables, or other buried devices. Depending on customer label design, the patented convex faces are wide enough (three inches) to carry identifying signs readable at up to 100 feet.

Though not as impact-proof as our hinged, ultra-high-impact HD delineator, the Utility Marker can still take an unbelievable amount of abuse. In several certified tests, this unhinged marker withstood over 75 automotive hits at 35mph. And due to its patented barbed anchor, cattle and deer can rub against it without pulling it out of the ground.

High-Impact Utility Signs

MTBF*:     45 to 75 hits at 35 mph

Above Grade:     3 to 4 ft.

Anchor:     Various - depending on application

Weights:     From 3.5 to 5 lbs.

Post Colors:     W, R, O, Y, G, Bu, Br, Gry

Sign Faces:     Reflective & Nonreflective